Compare Diecast Materials
*The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications for quality control.
Aluminum Alloy A380
Strength
Corrosion Resistance
Weldability
Aluminum alloy A380 is known for its excellent fluidity, crack resistance, and mechanical properties. It has a density of 2.71 g/cm³, tensile strength of 310 MPa, yield strength of 160 MPa, elongation of 3.5%, and hardness of 75 HB. A380 offers a good balance of performance and cost, making it ideal for automotive parts, electronic enclosures, and industrial components.
Tensile Strength
Elongation
Hardness
45 kpsi
3.5%
75 HRB
Max. Part Size:
23.62 in. x23.62 in x 9.84 in. (600mm x 600mm x 250.00mm)
Aluminum Alloy A360
Strength
Corrosion Resistance
Weldability
Aluminum alloy A360 has higher tensile strength (320 MPa), yield strength (170 MPa), and elongation (4%) than A380 and ADC12. With a density of 2.65 g/cm³ and hardness of 70 HB, A360 provides better corrosion resistance and high-temperature performance, suitable for high-demand mechanical parts and aerospace components, though it is more expensive.
Tensile Strength
Elongation
Hardness
46 kpsi
4%
70 HRB
Max. Part Size:
23.62 in. x23.62 in x 9.84 in. (600mm x 600mm x 250.00mm)
Aluminum Alloy ADC12
Strength
Corrosion Resistance
Aluminum alloy ADC12 is valued for its low cost, excellent fluidity, and casting performance. It has a density of 2.74 g/cm³, tensile strength of 280 MPa, yield strength of 150 MPa, elongation of 1%, and hardness of 75 HB. While not as strong or ductile as A380 and A360, ADC12 is ideal for mass-produced automotive parts, general mechanical parts, and electronic components, balancing economy and practicality.
Tensile Strength
Elongation
Hardness
41 kpsi
1%
75 HRB
Max. Part Size:
23.62 in. x23.62 in x 9.84 in. (600mm x 600mm x 250.00mm)